100W AC LED Street Light in Bangladesh

Description

100W AC LED Street Light in Bangladesh

The 100W AC LED Street Light in Bangladesh is a practical outdoor lighting solution for roads, commercial properties, industrial areas and other locations requiring reliable nighttime illumination. United Electronics supplies AC LED street lighting solutions for different residential, commercial, industrial and project requirements across Bangladesh.

A 100W LED street light provides a higher power category than smaller 50W fixtures and can be considered for applications requiring stronger illumination. However, wattage alone should not be used to determine whether a particular fixture is suitable for a project. Pole height, road width, pole spacing, optical design and required illumination levels should also be considered.

100W AC LED Street Light for Outdoor Applications

A 100W AC LED Street Light is designed to operate from a compatible AC electrical supply.

It can be considered for roads, commercial premises, industrial compounds, factory areas, parking facilities, institutional premises and other outdoor lighting applications.

Where grid electricity and electrical cabling are already available, AC-powered LED street lights can provide a straightforward lighting solution without requiring an individual solar panel and battery at each lighting point.

The final product should always be selected according to the actual requirements of the installation site.

Energy-Efficient LED Street Lighting

LED technology is widely used for modern street lighting because it can provide efficient illumination with comparatively controlled electrical consumption.

A 100 Watt LED Street Light can therefore be considered for locations requiring higher illumination than lower-wattage fixtures.

Actual lighting output depends on the LED chips, driver, optical lens, fixture design and thermal management.

For this reason, two different 100W LED street lights may provide different lighting performance even though their rated wattage is identical.

Professional projects should evaluate actual technical specifications rather than relying only on wattage.

AC-Powered Lighting System

An AC LED street light normally receives power from an electrical network or another compatible AC source.

This is one of the main differences between an AC street light and a solar street light.

A solar street lighting system normally requires a solar panel, rechargeable battery and charge controller to generate and store energy. An AC-powered fixture uses the available electrical supply and therefore does not require these solar energy-storage components for normal grid operation.

Where electrical infrastructure is already available, an AC LED street light can be a practical solution.

LED Driver and Electrical Performance

The LED driver is an important component of a 100W AC LED Street Light.

It regulates electrical power supplied to the LED modules and contributes to stable fixture operation.

For professional projects, buyers may need to evaluate parameters such as input voltage range, power factor, surge protection and driver efficiency.

These parameters vary between models and manufacturers. Therefore, exact values should always be taken from the technical datasheet of the specific product being offered.

This is particularly important when preparing government tenders, technical submittals or project quotations.

Outdoor Housing and Heat Management

A street light operates outdoors for extended periods, making fixture construction an important part of product selection.

The housing should support effective thermal management because LEDs and electronic drivers generate heat during operation. Proper heat dissipation can contribute to stable performance and product reliability.

Outdoor protection is also important.

Specific claims relating to IP rating, IK rating, housing material, corrosion resistance or operating temperature should only be included after verifying the specification of the exact model.

Applications of 100W AC LED Street Light

The 100W AC LED Street Light in Bangladesh can be considered for various outdoor lighting applications.

These may include roads, commercial properties, industrial areas, factory premises, office compounds, educational institutions, parking areas, internal roads and other suitable outdoor locations.

The actual suitability of a 100W fixture depends on the lighting requirement of the site.

Road width, mounting height, pole spacing and required illumination should be considered when planning the installation.

Pole Height, Spacing and Lighting Design

Correct pole placement can significantly influence the performance of an LED street light.

Mounting height determines how the light is distributed over the target area, while pole spacing influences lighting uniformity.

Installing the same 100W fixture at different heights can produce significantly different ground-level illumination.

For larger road or industrial lighting projects, a professional lighting layout can help determine the appropriate fixture quantity, pole height, spacing and mounting arrangement.

100W AC LED Street Light Price in Bangladesh

The 100W LED Street Light Price in Bangladesh can vary according to brand, LED quality, driver quality, housing construction, optical system, electrical protection, warranty and order quantity.

Products with the same 100W rating may have different technical specifications and construction quality.

Therefore, customers should compare the complete technical specification together with the commercial price rather than selecting a product only according to wattage or the lowest available price.

For bulk purchases, commercial projects or tender requirements, customers can request a quotation according to the required quantity and technical specifications.

Brand UniLax
Product Type AC LED Street Light
LED Power 100 Watt
LED Chip Type High-Efficiency SMD LED
Luminous Flux 12,000–14,000 Lumens
Color Temperature 5700K–6500K (Cool White)
Input Voltage AC 100-240V
Frequency 50/60 Hz
Power Factor >0.90
LED Efficiency Up to 130–140 lm/W
Driver High-Quality Constant Current LED Driver
Housing Material Die-Cast Aluminum
Lens Material High-Quality PC / Tempered Glass
Protection Grade IP66 Weatherproof
Impact Resistance IK08
Surge Protection 6KV–10KV
Beam Angle 70° × 140° / Road Lighting Distribution
Mounting Type Side Entry / Pole Mounted
Recommended Mounting Height 7-10 Meters
Operating Temperature -30°C to +50°C
LED Lifetime 50,000+ Hours
Warranty 3 Years

Selection and ordering guidance

Before ordering 100W AC LED Street Light in Bangladesh, confirm the exact product configuration, quantity and installation requirements. Review the specifications on this page together with the supplied model’s documentation. A project quotation should identify the offered model, delivery scope and warranty terms so that different offers can be compared consistently.

What should a quotation include?

Send the required quantity, delivery location and application details to United Electronics. If installation or additional accessories are required, request these as separate line items. For a replacement product, provide the existing model details and connection or mounting requirements. Availability and the current price should be confirmed before placing the order.

How should this product be selected?

Match the product to the actual electrical and installation requirements. For lighting, confirm the fixture’s photometric data, mounting height and required coverage. For controllers, check supported battery voltage and chemistry, panel input limits and permitted charging current. Select compatible accessories as part of the complete system.

Where can I compare related products?

See our Conical Pole Price in Bangladesh for related installation options. Compatibility must be confirmed for the exact combination; a related listing is not a guarantee that the products can be used together.

For general renewable energy information in Bangladesh, visit the Sustainable and Renewable Energy Development Authority (SREDA). This general resource does not certify the product or replace its technical documentation.